Odor Level Monitor Model XP-329m　

As the float moves up or down, the shaft rotates in angle that reflects
the position of the float. Magnet also rotates accordingly to the rotation
of the shaft. The magnetic IC then reads from the angle that the magnet
turns, and converts it to analog output of the liquid level.

Hardness Tester – Ideal for Narrow and Curved Surfaces

Designed for hardness testing of quenched and hardened materials, this instrument is particularly suitable for measuring components with narrow, curved, or difficult-to-access surfaces. It complies with the ASTM A1038-19 standard, excluding tensile-strength indication and conversion.

Key Features

1. Compact Probe

   • Features an approximately 8 mm diameter probe head, allowing measurements in confined spaces and on curved surfaces.

2. Exceptional Durability

   • Designed for 1 million or more measurements without the need for periodic replacement of parts, thanks to its Static Loading Method.

3. Rapid Measurement

   • Provides a hardness reading in approximately 2 seconds, helping reduce inspection time and improve productivity.

4. Virtually Invisible Indentation

   • Creates an indentation of approximately 0.1 mm, making it suitable for inspecting finished products with minimal surface marking.

5. Independent of Supporting Surface

   • Measurement results are not significantly influenced by the material supporting the workpiece, whether it is wood, iron, resin, or another material.

6. Measurement in Any Direction

   • The instrument can be used in any orientation, providing flexibility when inspecting components in different positions.

7. Adjustable Upper and Lower Limits

   • Set acceptable hardness ranges and receive an alarm when a measurement falls outside the specified limits.

8. Suitable for System Integration

   • An optional function allows the device to be integrated into automated or inline inspection systems for continuous measurement and testing.

9. ASTM A1038-19 Compliant

   • Meets the requirements of ASTM A1038-19, with the exception of tensile-strength display and conversion.

• Detects and visualizes various odors.
• Switch between continuous monitoring mode with a real-time display and 1-minute batch measurement mode.
• Equipped with an activated carbon fiber filter for automatic zero adjustment.
• A sensor status bar graph display indicates when maintenance is required.

Target Gases: Various odors and odor components.

Portable combustible gas detector, easy to use for the detection of combustible gases and solvent vapours.

• For safety check before working in underground construction site in the tank, manhole and tunnel etc.
• For safety of site workers.

Please find below the different models:
KD-12A for combustible or toxic gas in ppm range
KD-12B for combustible gas in %LEL
KD-12C for combustible and toxic gases in %vol.