US-T50
| Detection method | Through |
|---|---|
| Detecting distance | 500mm or less |
| Detection object | 10 x 30mm |
| Power supply | 24V DC ±10% / Ripple 10% or less |
| Current consumption | Transmitter:25mA or less / Receiver:15mA or less |
| Response time | 10ms or less |
| Output mode | Rating: Sink current 100 mA (30 VDC) or less |
| Operation mode | Detect ON |
| Operating angle | 20°(receiver) |
| Ultrasonic frequency | 380kHz ±10kHz |
| Indicator | Operation indicator (red LED) / Stability indicator (green LED) |
| Volume | Sensitivity adjustment |
| Material | Case/nut : Heat resistant ABS resin Detection side : glass epoxy conductive EPDM |
| Connection | Attached cord(dia.4mm) Transmitter: 0.2 mm2 x 2 cores, 2 m Receiver: 0.2 mm2 x 3 cores, 2 m |
| Weight | 80 g or less (transmitter/receiver) |
| Accessory | Operation manual, mounting bracket,screw for adjustment |
DL-S
| Detection method | Limited range reflective |
|---|---|
| Detecting distance | 0.1 - 2m (with adjustment at or less) |
| Setting distance | 0.2 - 2m (with 200×200mm white drawing paper) |
| Power supply | 12-24V DC ±0% / Ripple 10% or less |
| Current consumption | 30mA or less |
| Output mode | NPN/PNP open collector 2 outputs Rating: 100 mA (30 VDC) or less NPN: sink current / PNP: source current |
| Operation mode | Light ON/Dark ON selectable (with switch) |
| Response time | 2 ms or less |
| Hysterisis | 10% of detecting distance or less |
| Light source (light wavelength) | Infrared LED (880 nm) |
| Light receiving element | 2 segment photodiode |
| Indicator | Red LED: Operation indicator / Green LED: Stability indicator |
| Volume(VR) | NEAR/FAR: 5-turn optical distance adjustment |
| Switch(SW) | Light ON/Dark ON selector switch |
| Short circuit protection | Provided |
| Material | Case and lens: polyarylate |
| Connection | Attached cable (Outer dimension: dia.4mm) 0.2mm2 4 cores 2m |
| Weight | Approx. 100g |
| Accessories | Operation manual *The mounting bracket and the cable with connector are separately available. |
Light Curtain Sensors
Light Curtain sensors are specialized photoelectric devices that utilize two or more photoelectric beams. These sensors use through-beams (a separate sending and receiving unit) or Reflectors (a sending unit and a reflector). These units are suitable for detection of larger areas where the detection of objects ranging from the retrieval of parts in a pick-bin to a person entering the area of a robot is non-specific and a wide area must be covered. Specialized Light curtains are available for; Parts Counting, Human and Machine Safety Applications and multi-plane object detection (J-Series).