Molded RTD Probe
Temperature range: -50~105°C.
Employs standard Pt 100 or Pt 1000 DIN platinum resistance temperature elements.
Direct temperature measurement without need of any further assembly.
• Low cost
• Water-tight
• Construction
• Easy to use flexible design
• Temperature range: -50~105°C
• Employs standard Pt 100 or Pt 1000 DIN platinum resistance temperature elements
• Direct temperature measurement without need of any further assembly.
Technical Specifications
|
Sensing element |
Single RTD, 1 Pt 100W at 0°C or 1 Pt 1000W at 0°C as per IEC 751 class B or class A* (* class A available only for Pt 100 probes with 4- wire circuit) |
|
Type of construction |
Sensor and extension cable molded together as one hot vulcanized unit |
|
Temperature range |
-50 ~ 105°C |
|
Cable data |
2 or 4 stranded copper wires 0.35 mm2 (22 AWG), each conductor polypropylene insulated, overall thermoplastic elastomer insulation, outer diameter ~ 3.5mm |
|
Insulation resistance |
100 MW with 100 Vd.c. |
|
Optional stainless steel case |
SS 316 case (50 mm length X 6mm OD or 100mm length X 6mm OD) is available for protection of the sensor tip |
|
Markings |
Markings of accuracy report, manufacturing date and tractability (available only for probes with SS case) |
Dimensions
ORDERING INFORMATION
Standard MPT probe
MPT probe with SS cap
Calibration Report
MPT probes with SS cap can be supplied with calibration report engraved on the ca. The calibration repor provides information on temperature reading at 0°C and calibration date.
