HMD
The HMD (Hot Metal Detector) is a photoelectric sensor of the radiation photodetection type of the heat material that detects presence, and detects the position according to the receiving light of the infrared rays (heat ray) radiated from the heat material (scorching object). The transmitter is unnecessary.
It is a sensor that can be used under a severe use condition that heat, steam, and dust, etc. disperse like the ironworks and the heavy industry site, etc.. It is easy to handle this sensor by a small size, unnecessary cooling and using a fiber optic cable as receiver.
|
Series |
Type |
Power supply |
Control output |
||||
|
FD-A300P Series |
Fiber type |
AC100 to 220V |
Mini power relay output |
||||
|
FD-A320 Series |
Fiber type |
100 - 110VAC/200 - 220VAC |
Photo-MOS relay output |
||||
|
FD300A Series |
Fiber type |
AC100 to 220V |
Mini power relay output |
||||
|
FD600A Series |
Fiber type |
AC100 to 220V |
Mini power relay output |
||||
|
HD Series |
Simple type |
12 - 24VDC |
Relay output |
||||
|
KD50 Series |
Water-cooled |
100 - 110VAC/200 - 220VAC |
Relay output |
||||
HMPD
|
Series |
Type |
Power supply |
Detection method |
|
HMPD9000 Series |
Water-cooled |
24VDC |
CCD scanning |
CMD
The CMD (Cold Metal Detector) is composed of the transmitter and receiver. It is used even if the object temperature is high and under strong external light.
|
Series |
Type |
Power supply |
Control output |
|
CN-T100MR |
Simple type |
48 - 240VAC/24 - 240VDC |
Photo-MOS relay output |
|
FT101 Series |
Fiber type |
24 to 240VAC/ 24 to 240VDC |
Relay output |
|
FT10A Series |
Fiber type |
100 - 220VAC |
Mini power relay output |
|
FT44A Series |
Fiber type |
100 - 220VAC |
Mini power relay output |
|
NT100(P) Series |
Simple type |
12 - 24VDC |
NPN open collector output |
|
NT50(P) Series |
Simple type |
12 - 24VDC |
NPN open collector output |
Punch hole detection sensor
The punch hall detection sensor (weld point detector) detects the punch hall installed in the welding part of the coil (steel board) that runs continuously between the transmitter and the receiver.
|
Series |
Type |
|
SWD55 |
For single hole detection |
|
SWD60 |
For single and double hole detection |
Releted Products
Fiber Optic Cables & Sensors
Fiber Optic Sensors offer great flexibility and can be easily incorporated into new or exisiting designs. The fiber optic cables are non-contact, miniaturized and can fit into remote, tight spaces that would be difficult for cube style sensors. Due to the use of separate fiber optic cables, these sensors can also be used in areas that would be hazardous for a regular sensor. Fiber optic sensors make it easy to use specific color LEDs such as Red, White, Blue, and Green to optimize the performance of your process to special conditions.
Light Curtain Sensors
Light Curtain sensors are specialized photoelectric devices that utilize two or more photoelectric beams. These sensors use through-beams (a separate sending and receiving unit) or Reflectors (a sending unit and a reflector). These units are suitable for detection of larger areas where the detection of objects ranging from the retrieval of parts in a pick-bin to a person entering the area of a robot is non-specific and a wide area must be covered. Specialized Light curtains are available for; Parts Counting, Human and Machine Safety Applications and multi-plane object detection (J-Series).
